MODULO ZIGBEE 802.15.4 XBEE ZB S2C

Módulo DIGI XBEE XB24CZ7WIT-004 con antena tipo cable serie S2C.

Data Rate: RF 250 Kbps, Serial up to 1 Mbps
Indoor/Urban Range: 200 ft (60m)
Outdoor/RF Line-of-Sight Range: 4000 ft (1200 m)
Transmit Power: 3.1 mW (+5 dBm) / 6.3 mW(+8 dBm) boost mode
Receiver Sensitivity (1% PER): -100 dBm / -102 dBm boost mode

Características:
Serial Data Interface: UART, SPI
Configuration Method: API or AT commands, local or over-the-air
Frequency Band: ISM 2.4 GHz
Form Factor: Through-Hole
Interference Immunity: DSSS (Direct Sequence Spread Spectrum)
ADC Inputs: (4) 10-bit ADC inputs
Digital I/O: 15
Antenna Options: Integrated Wire
Operating Temperature: -40º C to +85º C
Dimensions (L x W x H) and Weight: Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm)

Networking and Security
Protocol: ZigBee PRO 2007, HA-Ready with support for binding/multicasting
Encryption: 128-bit AES
Reliable Packet Delivery: Retries/Acknowledgements
IDs: PAN ID and addresses, cluster IDs and endpoints (optional)
Channels: 16 channels

Power Requirements
Supply Voltage: 2.1 to 3.6V
Transmit Current: 33 mA @ 3.3 VDC / 45 mA boost mode
Receive Current: 28 mA @ 3.3 VDC / 31 mA boost mode
Power-Down Current: <1 uA @ 25º C

Regulatory Approvals
FCC, IC (North America): Yes
ETSI (Europe): Yes
C-TICK (Australia): Yes
TELEC (Japan): Yes
ANATEL (Brazil): Yes